Flexible Metal Conduit
Metal Conduit
Zhejiang Flexible Technology Co., Ltd.
Home   >   News

Installation Of Plastic Package Flexible Metal Conduit

May. 16, 2018

Plastic Package Flexible Metal Conduit shields all external insecurity from the cables used in production and processing. When using, first put the wire and cable into the pipe, and then add the corresponding type of DPJ type connector. In order to ensure the best performance of the Plastic Package Flexible Metal Conduit during use, there are also stringent requirements for installation. Specific requirements are as follows:

1. The bending radius should not be less than 6 times the outer diameter of the hose.

2. The spacing between the fixed points should not be greater than lm, and the distance between the tube card and the terminal and the midpoint of the elbow should be 300mm.

3. The Plastic Package Flexible Metal Conduit connected to a recessed light fixture or similar appliance should have a fixed tube card at the end of the tube, which should be installed 1 meter from the edge of the lamp or fixture along the length of the tube.

Our Flexible Metal Conduit includes: Flexible Metal Conduit Low Fire Hazard, Electrical Flexible Conduit, etc. If you have any questions about the product, please feel free to contact us.

ATEX Flexible Metal Conduit